D.A.D LUG POWER MUFFLER
Garson does not sell directly to customers abroad.
For sales and information about our products, please contact one of the following international Garson dealers.
D.A.D LUG POWER MUFFLER
* Installation sample :
  GSJ15W FJ CRUISER (LUG-Ⅰ type DUAL)
D.A.D LUG POWER MUFFLER
MUFFLER LINE UP   SPEC   OPTION PARTS
Conforms to the Japanese regulations
(Includes Certificate of Confromity to Safety Standards.)
Developed for each engine for increasing power.
Incorporates a length-adjustable muffler outlet for fitting various aero parts.
All development and manufacturing is performed domestically: Made in Japan
Realizes the top quality standards of major car manufacturers.
Employs a D.A.D emblem with Austrian made SWAROVSKI ELEMENTS.
Only the highest grade SUS304 is used in stainless steal parts.

MUFFLER LINE UP

LUG-Ⅰ type DUAL

( φ120 x 80 )
 

LUG-Ⅰ type SINGLE

( φ120 x 80 )
 

LUG-Ⅱ type DUAL

( φ95 x 70 )
 

LUG-Ⅲ type DUAL

( φ120 x 80 )
 

LUG-Ⅲ type SINGLE

( φ120 x 80 )
 

LUG-Ⅳ type DUAL

( φ95 x 70 )
 

TOP

SPEC

Conforms to the Japanese regulations

D.A.D LUG POWER MUFFLERS are manufactured by safety standards set by the Road Trucking Vehicle Act. Vehicles conforming to these safety standards will have a Certificate of Conformity and a Conformity Plate on the muffler itself.

Length-Adjustable Muffler Outlets

Choose from our muffler with customer adjustable outlets or the more affordable type with standard outlets. Use this muffler from the start, with your stock bumper, to the finish, with your after market aero bumper.

Outer convex clearing: 2.5R

The muffler outlets' tips are within the 2.5R standard, and conform to Japanese External Projections Criteria. That means improved safety so people will not trip on the muffler when passing by or when washing the vehicle.

New Regulations for Acceleration Noise

In April of 2010, "New Regulations for Emitted Noise of Rear Muffler Silencers" were enforced by the Ministry of Land, Infrastructure and Transport. As of April 1, 2010, newly registered vehicles must receive pre-certification of acceleration exhaust noise test, and receive a "Performance Validation Mark" on the muffler. Without this certification, the vehicle cannot pass the safety standards or the Japanese vehicle test. Select models of the D.A.D LUG POWER MUFFLER have received pre-certification of acceleration exhaust noise test, so you can use these products with confidence.

2010 New Regulations for Acceleration Noise (Pre-certification system)

Following the revised safety standard, newly registered vehicles after April 1, 2010 must receive Pre-certification of Acceleration Exhaust Noise Test, and receive a "Performance Validation Mark" on the muffler. Without this certification, the vehicle cannot pass the safety standards or the Japanese vehicle test.

The following vehicles have received the Pre-certification of Acceleration Exhaust Noise Test. Even vehicles newly registered after April 1, 2010 require the vehicle test.

Model Type
LEXUS LS600h UVF45
LS460 USF40, USF41
RX450 GYL15W, GYL16W
IS-F USE20
HS250h ANF10
TOYOTA SAI AZK10
CROWN GRS204, GRS200
PRIUS ZVW30
COROLLA FIELDER ZRE142G, NZE141G
ALPHARD & VELLFIRE GGH20W, GGH25W, ANH20W, ANH25W
NISSAN FAIRLADY Z Z34
ELGRAND TE52, PE52
HONDA STEPWGN RK1, RK5

* Send Product Inquiries by the international Garson dealers.
* Some models in the muffler lineup do not conform to the test. Please verify before purchasing.

Exhaust Gas Test

The stock catalytic converter greatly restricts the flow of exhaust, making it difficult to increase power. However, if the converter is removed, it will not pass emissions tests. D.A.D POWER UP SPORTS CATALYZER takes a new approach towards the internal construction of the catalyzer and produced one that does not limit exhaust flow. The catalyzer realizes unbelievable power while passing the Japan's exhaust gas tests, the strictest tests in the world.

TOP

OPTION PARTS
D.A.D POWER UP CENTER PIPE

■ All stainless steel model

Our stainless steel Flagship Model is handmade, one by one by skilled craftsmen who carefully TIG weld and polish the muffler to create a high level of quality and beauty.

■ Alstar Model

The durable Alstar model is individually welded and coated with an Alstar heat resistant finish, by our experienced craftsmen. We are able to offer hight quality and low price, through carful choice of materials and thorough quality control.

* Modifications to the center pipe are necessary for installation.

* This product will pass the vehicle inspection when used with the D.A.D LUG POWER MUFFLER. When attached to a stock rear muffler, the vehicle will not pass the car inspection because exhaust sound will exceed the safety standard.

TOP



Copyright (C) GARSON . All Rights Reserved .